- Brand: Diatone
- Model: Crusader GT2 200
- Ready to Fly: No, Plug and Fly
Material: carbon fiber
Motor mount boit holes: 16/19mm
- Weight : 0.32KG (0.7 pound)
- D-Link F3 flight controller
302X 30A BLHeli_S ESC (input voltage: 3-4S Lipo)
D-Silver 2205 2300KV competitive motor
HS1177 600TVL SONY camera
SP3 48CH video transmitter (input voltage: 3-4S Lipo)
5 inch propeller
- Price: US$279.99
- Availability: In Stock
Diatone crusader GT2 200 Buy Now
Diatone Crusader GT2 175 Buy Now
Diatone Crusader GT2 150Buy Now
The Diatone Crusader GT2 Complete Guide
Diatone Crusader GT2 Complete guide is here. The Diatone GT2 is a piece of machine not for newbies, its powerful not recommended with stabilisation mode, there is no space for fat receivers (im talking about u flysky flyers). Pack with the D-Silver Motors from diatone and propitiatory stuff. I hope this guide can help you understand how to run the diatone crusader better.
Setting up the receiver for the Diatone Crusader GT2
Firstly, screw the 2 screws in the front near the camera followed by loosening the screws on the back to ensure that the top plate is easily opened.
next there is a cable that is for S.bus/ppm for you to connect your receiver to the Flight controller. Done! thats all!
Since the Diatone Crusader is a very low profile frame, i would not recommend putting the antenna’s from ur receiver upwards as it be chopped off in a crash. I would recommend putting ur antennas like this to protect them.
The Diatone Crusader GT2 is simple depending on what KV motors you are using.
If you are not certain about how the Crusader’s PID settings as it is a racer, you can use the default PIDs for betaflight.
For me, i like to drop my P&D by half before tuning it to my my liking. As my Setup is a 2300kv motors, running on D-10 is much cooler for me.
Diatone Crusader GT2 200 First Flight
Before Flying make sure to do the above steps and go easy on the throttle, the Diatone Crusader GT2 200 is super fast
The Crusader is a Unibody Frame so breaking an arm requires you to change the whole body
GT2 200 GT2 175 GT2 150
Diatone SP3 OSD VTX race band
The VTX is good enough for joining local races. It uses Minum OSD
Diatone Dlink FC F3 PDB
All in one PDB FC, F3 board that is good for smaller builds
Motors Diatone D- Silver, 2300KV, 2450KV
The D-Silver motors are super good
Theres no mod for this beautiful BNF quad, its too good already.
One of the best Bind and Fly quads ever read the full review here https://uav-review.com/diatone-crusader-gt2-200-review/